qp.ControlledQubitUnitary¶
- class ControlledQubitUnitary(U, wires)[source]¶
Bases:
Controlled2Apply an arbitrary fixed unitary matrix
Utowires. Ifn = len(wires) `` and ``Uhaskwires, then the firstn - kfromwiresserve as control, andUlives on the lastkwires.In addition to default
Operationinstance attributes, the following are available forControlledQubitUnitary:wires: wires of the final controlled unitary, consisting of control wires following by target wirescontrol_values: the state on which to apply the controlled operation (see below)work_wires: wires made use of during the decomposition of the operation into native operations
Details:
Number of wires: Any (the operation can act on any number of wires)
Number of parameters: 1
Number of dimensions per parameter: (2,)
Gradient recipe: None
- Parameters:
U (array[complex]) – a square unitary matrix that will be used to construct a QubitUnitary operator, used as the base operator.
wires (Union[Wires, Sequence[int], or int]) – the wires the full controlled unitary acts on, composed of the controlled wires followed by the target wire.
control_values (List[int or bool]) – a list providing the state of the control qubits to control on (default is the all 1s state).
unitary_check (bool) – whether to check whether an array U is unitary when creating the operator (default False).
work_wires (Union[Wires, Sequence[int], or int]) – auxiliary wire(s) that may be utilized during the decomposition of the operator into native operations.
Example
The following shows how a single-qubit unitary can be applied to wire
2with control on both wires0and1:>>> U = np.array([[ 0.94877869, 0.31594146], [-0.31594146, 0.94877869]]) >>> qp.ControlledQubitUnitary(U, wires=[0, 1, 2]) ControlledQubitUnitary(U=[[ 0.94877869 0.31594146] [-0.31594146 0.94877869]], wires=[0, 1, 2], control_values=[ True True], work_wires=[], work_wire_type=borrowed, unitary_check=False)
Typically, controlled operations apply a desired gate if the control qubits are all in the state \(\vert 1\rangle\). However, there are some situations where it is necessary to apply a gate conditioned on all qubits being in the \(\vert 0\rangle\) state, or a mix of the two.
The state on which to control can be changed by passing a string of bits to control_values. For example, if we want to apply a single-qubit unitary to wire
3conditioned on three wires where the first is in state0, the second is in state1, and the third in state1, we can write:>>> qp.ControlledQubitUnitary(U, wires=[0, 1, 2, 3], control_values=[0, 1, 1]) ControlledQubitUnitary(U=[[ 0.94877869 0.31594146] [-0.31594146 0.94877869]], wires=[0, 1, 2, 3], control_values=[False True True], work_wires=[], work_wire_type=borrowed, unitary_check=False)
or
>>> qp.ControlledQubitUnitary(U, wires=[0, 1, 2, 3], control_values=[False, True, True]) ControlledQubitUnitary(U=[[ 0.94877869 0.31594146] [-0.31594146 0.94877869]], wires=[0, 1, 2, 3], control_values=[False True True], work_wires=[], work_wire_type=borrowed, unitary_check=False)
Available decompositions
Resources are general, for \(n\) target wires and \(c\) control wires. Each circuit shows one example of the rule. Use a rule when decomposing with
qp.decompose:qp.decompose(gate_set=..., fixed_decomps={qp.ControlledQubitUnitary: "<name>"})
bisectGate
Count
\(4\)
\(4\)
\(2\)
PhaseShiftwith \(c - 1\) controls\(1\)
MultiControlledXwith \(c/2\) controls (even \(c\))\(6\)
MultiControlledXwith \(\lceil c/2 \rceil\) controls (odd \(c\))\(2\)
MultiControlledXwith \(\lfloor c/2 \rfloor\) controls (odd \(c\))\(4\)
where \(n = 1\) and \(c \geq 2\), the circuit shows \(c = 3\), and each control wire with control value \(0\) adds two
PauliXgates, not included in the countssingle_control_zyzGate
Count
\(3\)
\(2\)
\(2\)
\(1\)
where \(n = 1\) and \(c = 1\), and each control wire with control value \(0\) adds two
PauliXgates, not included in the countsmulti_control_zyzGate
Count
\(3\)
\(2\)
MultiControlledXwith \(c - 1\) controls\(2\)
PhaseShiftwith \(c - 1\) controls\(1\)
where \(n = 1\) and \(c \geq 2\), the circuit shows \(c = 3\), and each control wire with control value \(0\) adds two
PauliXgates, not included in the countstwo_qubitGate
Count
ControlledQubitUnitaryon \(1\) target wire with \(c\) controls\(4\)
MultiControlledXwith \(c + 1\) controls\(3\)
Controlled(RZ)with \(c\) controls\(1\)
Controlled(RY)with \(c\) controls\(2\)
PhaseShiftwith \(c - 1\) controls\(1\)
where \(n = 2\), the circuit shows \(c = 1\), and each control wire with control value \(0\) adds two
PauliXgates, not included in the countsto_controlled_qubit_unitaryGate
Count
Controlled(QubitUnitary)with \(c\) controls\(1\)
where \(n \geq 3\), and the circuit shows \(c = 1\)
The following rules are for
Adjoint(ControlledQubitUnitary), and they can be accessed with:qp.decompose(gate_set=..., fixed_decomps={"Adjoint(ControlledQubitUnitary)": "<name>"})
conjugate_transposeAttributes
partial(func, *args, **keywords) - new function with partial application of the given arguments and keywords.
The expected types for the arguments of an operator.
Dictionary mapping argument names to their values.
Arithmetic depth of the operator.
The target operator.
Batch size of the operator if it is used with broadcasted parameters.
The names of arguments that are treated as compilable static arguments.
Dictionary mapping compilable argument names to their values.
For each control wire, denote whether to control on
TrueorFalseThe control wires.
Legacy Operator compatibility view of dynamic numerical arguments.
The names of arguments that are treated as dynamic.
Dictionary mapping dynamic argument names to their values.
Gradient computation method.
Compute 'grad_recipe' lazily.
bool(x) -> bool
bool(x) -> bool
bool(x) -> bool
Whether the expected signature of an operator is fixed.
bool(x) -> bool
bool(x) -> bool
bool(x) -> bool
The names of arguments that represent dynamic data wrapped in static structures (known as Pytrees).
Dictionary mapping hybrid argument names to their values.
Legacy Operator compatibility view of non-dynamic, non-wire constructor arguments.
Whether this operator contains only abstract data.
This property determines if an operator is verified to be Hermitian.
Operator name.
Number of dimensions per trainable parameter of the operator.
Number of trainable parameters.
Legacy Operator compatibility view of dynamic numerical arguments as a list.
A
PauliSentencerepresentation of the Operator, orNoneif it doesn't have one.The names of arguments that are treated as static.
Dictionary mapping static argument names to their values.
The wires of the target operator.
partial(func, *args, **keywords) - new function with partial application of the given arguments and keywords.
The names of arguments corresponding to wires.
Dictionary mapping wire argument names to their values.
The expected number of wire labels for each wire argument.
Wires that the operator acts on.
The type of work wires, can be
"zeroed"or"borrowed"Auxiliary wires that can be used in the decomposition.
- U¶
partial(func, *args, **keywords) - new function with partial application of the given arguments and keywords.
- arg_specs = {'U': AbstractArray((-1, -1), complex128, weak_type=True), 'control_values': AbstractArray((-1,), bool, weak_type=True), 'wires': AbstractWires(-1), 'work_wires': AbstractWires(-1)}¶
The expected types for the arguments of an operator. This attribute is optional—not setting it has no loss of functionality. If set, it can be used to perform automatic validation of an operators inputs during construction. Additionally, when defining decomposition rules for an operator, operator types with
arg_specsthat spans all the arguments with static types can be placed in the rules’ resources without needing to fully construct abstract operators.Note
A type that is listed in ‘arg_specs’ says what an argument is allowed to be, not what it actually is. For example, if arg_specs contains Complex[-1, -1], the Operator can still be instantiated with a real float64 array, which will then be reported as complex even though it holds real data.
The decomposition graph goes by the reported type, so real and complex inputs will look like the same operator and share one rule. To let them decompose differently, leave the argument out of
arg_specsand give each rule aregister_conditionthat checks the type. For a concrete example seeBasisRotation.
- arguments¶
Dictionary mapping argument names to their values.
- arithmetic_depth¶
- base¶
The target operator.
- batch_size¶
Batch size of the operator if it is used with broadcasted parameters.
The
batch_sizeis determined based onndim_paramsand the provided parameters for the operator. If (some of) the latter have an additional dimension, and this dimension has the same size for all parameters, its size is the batch size of the operator. If no parameter has an additional dimension, the batch size isNone.- Returns:
Size of the parameter broadcasting dimension if present, else
None.- Return type:
int or None
- compilable_argnames = ('work_wire_type', 'unitary_check')¶
The names of arguments that are treated as compilable static arguments. Compilable static arguments are a subset of static arguments—arguments whose concrete values are known when compiling the program. But, unlike
static_argnames, they are lowered to the compiler intermediate representation, making their values visible to the compiler, which may be useful if the compiler needs to interact with such values. Such values may include numbers, strings, and lists, tuples, or dictionaries thereof. This feature is opt-in; if any static arguments are not guaranteed to be compilable, it is safer to place them instatic_argnames.Note
An operator can only specify
static_argnamesandhybrid_argnames, orcompilable_argnames, but not both; if any static or hybrid arguments are not or cannot be lowered to the IR, then all static and hybrid arguments are assumed to not be lowerable.
- compilable_args¶
Dictionary mapping compilable argument names to their values.
- control_values¶
For each control wire, denote whether to control on
TrueorFalse
- control_wires¶
The control wires.
- data¶
Legacy Operator compatibility view of dynamic numerical arguments.
- dynamic_argnames = ('U', 'control_values')¶
The names of arguments that are treated as dynamic. Dynamic arguments are numerical arguments whose concrete values may not be known at compile-time, such as rotation angles, matrices, etc., and may include trainable data. Additionally, dynamic arguments are the only ones used to infer
batch_size, necessary for broadcasting support.Inputs for these arguments must be scalars, arrays, or castable to arrays (e.g. multi- dimensional lists with homogenous shapes), and operator constructors will be responsible for “canonicalizing” them (such as casting a list input to an array). At compile-time, the concrete values of these arguments are assumed to be unknown—only their shapes and data types are known.
- dynamic_args¶
Dictionary mapping dynamic argument names to their values.
- grad_method¶
- grad_recipe¶
Compute ‘grad_recipe’ lazily.
- has_adjoint¶
- has_decomposition¶
- has_diagonalizing_gates¶
- has_fixed_sig = False¶
Whether the expected signature of an operator is fixed. If
True, then the operator’s signature will always be fully known. When defining decomposition rules for an operator, operator types with fixed signatures can be placed in the rules’ resources without needing to fully construct abstract operators. This is set automatically whenarg_specscovers every dynamic and wire argument, there are no hybrid, static, or compilable arguments, and every declared type is fully fixed (no unknown array shapes or wire counts).
- has_generator¶
- has_matrix¶
- has_sparse_matrix¶
- hybrid_argnames = ()¶
The names of arguments that represent dynamic data wrapped in static structures (known as Pytrees). Names in this category must be disjoint from
dynamic_argnames,static_argnames, andcompilable_argnames, but may overlap withwire_argnameswhen those arguments contain nested structures of wires. Examples of hybrid arguments include collections of wires or dynamic arrays, operators, etc.Note
An operator can only specify
static_argnamesandhybrid_argnames, orcompilable_argnames, but not both; if any static or hybrid arguments are not or cannot be lowered to the IR, then all static and hybrid arguments are assumed to not be lowerable.
- hybrid_args¶
Dictionary mapping hybrid argument names to their values.
- hyperparameters¶
Legacy Operator compatibility view of non-dynamic, non-wire constructor arguments.
- is_fully_abstract¶
Whether this operator contains only abstract data.
- is_verified_hermitian¶
- name¶
Operator name.
- ndim_params¶
Number of dimensions per trainable parameter of the operator.
By default, this property returns the numbers of dimensions of the parameters used for the operator creation. If the parameter sizes for an operator subclass are fixed, this property can be overwritten to return the fixed value.
- Returns:
Number of dimensions for each trainable parameter.
- Return type:
tuple
- num_params¶
Number of trainable parameters.
- parameters¶
Legacy Operator compatibility view of dynamic numerical arguments as a list.
- pauli_rep¶
A
PauliSentencerepresentation of the Operator, orNoneif it doesn’t have one.
- static_argnames = ()¶
The names of arguments that are treated as static. Static arguments are those whose concrete values are known when compiling the program. Arguments specified here are not lowered to a compiler intermediate representation (IR). Alternatively, if an argument is of a type that can be lowered, it can be moved to
compilable_argnames.Note
An operator can only specify
static_argnamesandhybrid_argnames, orcompilable_argnames, but not both; if any static or hybrid arguments are not or cannot be lowered to the IR, then all static and hybrid arguments are assumed to not be lowerable.
- static_args¶
Dictionary mapping static argument names to their values.
- target_wires¶
The wires of the target operator.
- unitary_check¶
partial(func, *args, **keywords) - new function with partial application of the given arguments and keywords.
- wire_argnames = ('wires', 'work_wires')¶
The names of arguments corresponding to wires. Values for these arguments are automatically wrapped in
Wiresobjects by theOperator2constructor. If an argument is expected to be a structure that wraps wires (known as pytrees), such as a list of wire registers, make sure to include its name inhybrid_argnamesas well. Additionally,Operator2does not descend into the pytree structure of such arguments, so subclasses must ensure every wire leaf inside a hybrid wire argument is already aWiresobject before forwarding it tosuper().__init__.The order in which names appear in
wire_argnamesdetermines the order in which their wires appear inop.wires(seeOperator2.wires). For hybrid wire arguments, the containedWiresleaves are ordered by pytree traversal order. Wires contributed by arguments which are themselvesOperator2objects are appended after allwire_argnameswires. The special names"work_wires"and"work_wire"may be included inwire_argnamesbut their values are excluded fromop.wires.
- wire_args¶
Dictionary mapping wire argument names to their values.
- wire_sizes = (None, None)¶
The expected number of wire labels for each wire argument. If any wire arguments support an arbitrary size,
Nonemust be used. By default, all wire arguments are assumed to support arbitrary sizes. For hybrid wire arguments, the wire size must always beNone. Specifying wire sizes allows for additional automatic validation to be implemented, but, specifying it is optional if such validation is not needed.
- wires¶
- work_wire_type¶
The type of work wires, can be
"zeroed"or"borrowed"
- work_wires¶
Auxiliary wires that can be used in the decomposition.
Methods
adjoint()Create an operation that is the adjoint of this one.
compute_decomposition(*args, **kwargs)Representation of the operator as a product of other operators (static method).
compute_diagonalizing_gates(*args, **kwargs)Sequence of gates that diagonalize the operator in the computational basis (static method).
compute_eigvals(*args, **kwargs)Eigenvalues of the operator in the computational basis (static method).
compute_matrix(*args, **kwargs)Representation of the operator as a canonical matrix in the computational basis (static method).
compute_sparse_matrix(*args[, format])Representation of the operator as a sparse matrix in the computational basis (static method).
Representation of the operator as a product of other operators.
Sequence of gates that diagonalize the operator in the computational basis.
eigvals()Eigenvalues of the operator in the computational basis.
Generator of an operator that is in single-parameter-form.
label([decimals, base_label, cache])A customizable string representation of the operator.
map_wires(wire_map)Returns a new operator with its wires changed according to the given wire map.
matrix([wire_order])Representation of the operator as a matrix in the computational basis.
pow(z)Raise the base to a power while preserving the controls.
queue([context])Append the operator to the Operator queue.
simplify()Reduce the depth of nested operators to the minimum.
sparse_matrix([wire_order, format])Representation of the operator as a sparse matrix in the computational basis.
terms()Representation of the operator as a linear combination of other operators.
- adjoint()¶
Create an operation that is the adjoint of this one. Used to simplify
Adjointoperators constructed byadjoint(). TODO: [sc-120844] Fix docstring after Adjoint is addedAdjointed operations are the conjugated and transposed version of the original operation. Adjointed ops are equivalent to the inverted operation for unitary gates.
Operator2.adjointcan be optionally defined by Operator developers, whileadjoint()is the entry point for constructing generic adjoint representations.- Returns:
The adjointed operation.
>>> from pennylane.core.operator import Operator2 >>> class MyClass(Operator2): ... dynamic_argnames = ("phi",) ... ... def __init__(self, phi, wires): ... super().__init__(phi, wires) ... ... def adjoint(self): ... return self ... >>> op = MyClass(0.5, wires=0).adjoint() >>> op MyClass(0.5, wires=[0])
- classmethod compute_decomposition(*args, **kwargs)¶
Representation of the operator as a product of other operators (static method).
\[O = O_1 O_2 \dots O_n.\]Note
Operations making up the decomposition should be queued within the
compute_decompositionmethod.See also
- Parameters:
*args (tuple) – Positional arguments of the operator
**kwargs (dict) – Keyword arguments of the operator
- Returns:
decomposition of the operator
- Return type:
list[Operator2]
- static compute_diagonalizing_gates(*args, **kwargs)¶
Sequence of gates that diagonalize the operator in the computational basis (static method).
Given the eigendecomposition \(O = U \Sigma U^{\dagger}\) where \(\Sigma\) is a diagonal matrix containing the eigenvalues, the sequence of diagonalizing gates implements the unitary \(U^{\dagger}\).
The diagonalizing gates rotate the state into the eigenbasis of the operator.
See also
- Parameters:
*args (tuple) – Positional arguments of the operator
**kwargs (dict) – Keyword arguments of the operator
- Returns:
list of diagonalizing gates
- Return type:
list[.Operator2]
- static compute_eigvals(*args, **kwargs)¶
Eigenvalues of the operator in the computational basis (static method).
If
diagonalizing_gatesare specified and implement a unitary \(U^{\dagger}\), the operator can be reconstructed as\[O = U \Sigma U^{\dagger},\]where \(\Sigma\) is the diagonal matrix containing the eigenvalues.
Otherwise, no particular order for the eigenvalues is guaranteed.
See also
- Parameters:
*args (tuple) – Positional arguments of the operator
**kwargs (dict) – Keyword arguments of the operator
- Returns:
eigenvalues
- Return type:
tensor_like
- static compute_matrix(*args, **kwargs)¶
Representation of the operator as a canonical matrix in the computational basis (static method).
The canonical matrix is the textbook matrix representation that does not consider wires. Implicitly, this assumes that the wires of the operator correspond to the global wire order.
See also
- Parameters:
*args (tuple) – Positional arguments of the operator
**kwargs (dict) – Keyword arguments of the operator
- Returns:
matrix representation
- Return type:
tensor_like
- static compute_sparse_matrix(*args, format='csr', **kwargs)¶
Representation of the operator as a sparse matrix in the computational basis (static method).
The canonical matrix is the textbook matrix representation that does not consider wires. Implicitly, this assumes that the wires of the operator correspond to the global wire order.
See also
- Parameters:
*args (tuple) – Positional arguments of the operator
format (str) – format of the returned scipy sparse matrix, for example ‘csr’
**kwargs (dict) – Keyword arguments of the operator
- Returns:
sparse matrix representation
- Return type:
scipy.sparse._csr.csr_matrix
- decomposition()[source]¶
Representation of the operator as a product of other operators.
\[O = O_1 O_2 \dots O_n\]A
DecompositionUndefinedErroris raised if no representation by decomposition is defined.See also
- Returns:
decomposition of the operator
- Return type:
list[Operator2]
- diagonalizing_gates()¶
Sequence of gates that diagonalize the operator in the computational basis.
Given the eigendecomposition \(O = U \Sigma U^{\dagger}\) where \(\Sigma\) is a diagonal matrix containing the eigenvalues, the sequence of diagonalizing gates implements the unitary \(U^{\dagger}\).
The diagonalizing gates rotate the state into the eigenbasis of the operator.
A
DiagGatesUndefinedErroris raised if no representation by decomposition is defined.See also
- Returns:
a list of operators
- Return type:
list[.Operator2] or None
- eigvals()¶
Eigenvalues of the operator in the computational basis.
If
diagonalizing_gatesare specified and implement a unitary \(U^{\dagger}\), the operator can be reconstructed as\[O = U \Sigma U^{\dagger},\]where \(\Sigma\) is the diagonal matrix containing the eigenvalues.
Otherwise, no particular order for the eigenvalues is guaranteed.
Note
When eigenvalues are not explicitly defined, they are computed automatically from the matrix representation. Currently, this computation is not differentiable.
A
EigvalsUndefinedErroris raised if the eigenvalues have not been defined and cannot be inferred from the matrix representation.See also
- Returns:
eigenvalues
- Return type:
tensor_like
- generator()¶
Generator of an operator that is in single-parameter-form.
For example, for operator
\[U(\phi) = e^{i\phi (0.5 Y + Z\otimes X)}\]we get the generator
>>> U.generator() 0.5 * Y(0) + Z(0) @ X(1)
The generator may also be provided in the form of a dense or sparse Hamiltonian (using
LinearCombinationandSparseHamiltonianrespectively).
- label(decimals=None, base_label=None, cache=None)¶
A customizable string representation of the operator.
- Parameters:
decimals=None (int) – If
None, no parameters are included. Else, specifies how to round the parameters.base_label=None (str) – overwrite the non-parameter component of the label
cache=None (dict) – dictionary that carries information between label calls in the same drawing
- Returns:
label to use in drawings
- Return type:
str
Example:
>>> op = qp.RX(1.23456, wires=0) >>> op.label() 'RX' >>> op.label(base_label="my_label") 'my_label' >>> op = qp.RX(1.23456, wires=0) >>> op.label() 'RX' >>> op.label(decimals=2) 'RX\n(1.23)' >>> op.label(base_label="my_label") 'my_label' >>> op.label(decimals=2, base_label="my_label") 'my_label\n(1.23)'
Note that by default, operator wires and static inputs are not included in the label. To override this behaviour,
Operator2subclasses must override thelabelmethod.If the operation has a matrix-valued parameter and a cache dictionary is provided, unique matrices will be cached in the
'matrices'key list. The label will contain the index of the matrix in the'matrices'list.>>> op2 = qp.QubitUnitary(np.eye(2), wires=0) >>> cache = {'matrices': []} >>> op2.label(cache=cache) 'U\n(M0)' >>> cache['matrices'] [array([[1., 0.], [0., 1.]])] >>> op3 = qp.QubitUnitary(np.eye(4), wires=(0,1)) >>> op3.label(cache=cache) 'U\n(M1)' >>> cache['matrices'] [array([[1., 0.], [0., 1.]]), array([[1., 0., 0., 0.], [0., 1., 0., 0.], [0., 0., 1., 0.], [0., 0., 0., 1.]])]
- map_wires(wire_map)¶
Returns a new operator with its wires changed according to the given wire map.
- Parameters:
wire_map (dict) – dictionary containing the old wires as keys and the new wires as values
- Returns:
new operator
- Return type:
.Operator2
- matrix(wire_order=None)¶
Representation of the operator as a matrix in the computational basis.
If
wire_orderis provided, the numerical representation considers the position of the operator’s wires in the global wire order. Otherwise, the wire order defaults to the operator’s wires.If the matrix depends on trainable parameters, the result will be cast in the same autodifferentiation framework as the parameters.
A
MatrixUndefinedErroris raised if the matrix representation has not been defined.See also
- Parameters:
wire_order (Iterable) – global wire order, must contain all wire labels from the operator’s wires
- Returns:
matrix representation
- Return type:
tensor_like
- pow(z)¶
Raise the base to a power while preserving the controls.
- queue(context=<class 'pennylane.core.queuing.QueuingManager'>)¶
Append the operator to the Operator queue.
- simplify()¶
Reduce the depth of nested operators to the minimum.
- Returns:
simplified operator
- Return type:
.Operator2
- sparse_matrix(wire_order=None, format='csr')¶
Representation of the operator as a sparse matrix in the computational basis.
If
wire_orderis provided, the numerical representation considers the position of the operator’s wires in the global wire order. Otherwise, the wire order defaults to the operator’s wires.A
SparseMatrixUndefinedErroris raised if the sparse matrix representation has not been defined.See also
- Parameters:
wire_order (Iterable) – global wire order, must contain all wire labels from the operator’s wires
format (str) – format of the returned scipy sparse matrix, for example ‘csr’
- Returns:
sparse matrix representation
- Return type:
scipy.sparse._csr.csr_matrix
- terms()¶
Representation of the operator as a linear combination of other operators.
\[O = \sum_i c_i O_i\]A
TermsUndefinedErroris raised if no representation by terms is defined.- Returns:
list of coefficients \(c_i\) and list of operations \(O_i\)
- Return type:
tuple[list[tensor_like or float], list[.Operator2]]